请选择 进入手机版 | 继续访问电脑版
搜索
查看: 20|回复: 2

mt7620a 使用github 稳定版本,在打开wifi直接死机

[复制链接]

8

主题

18

帖子

70

积分

注册会员

Rank: 2

积分
70
发表于 2018-10-9 10:55:50 | 显示全部楼层 |阅读模式
问题:mt7620a 使用github 稳定版本,在打开wifi直接死机打印信息如下:

.................
[    7.150000] init: - preinit -
[    7.750000] 8021q: adding VLAN 0 to HW filter on device eth0
[    7.810000] random: mktemp urandom read with 12 bits of entropy available
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[   11.510000] jffs2: notice: (317) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[   11.540000] mount_root: switching to jffs2 overlay
[   11.590000] procd: - early -
[   11.600000] procd: - watchdog -
[   12.500000] procd: - ubus -
[   13.520000] procd: - init -
Please press Enter to activate this console.
[   14.540000] NET: Registered protocol family 10
[   14.550000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   14.570000] Ralink/MTK WiFi EEPROM API Build for MT7620.
[   15.160000] ===> rt2880_probe
[   15.170000]
[   15.170000]
[   15.170000] === pAd = c027a000, size = 1351688 ===
[   15.170000]
[   15.190000] <-- RTMPAllocTxRxRingMemory, Status=0
[   15.200000] <-- RTMPAllocAdapterBlock, Status=0
[   15.210000] MT76x2 AP Driver version: 3.0.5.0
[   15.220000] chip_id1=0x7620, chip_id2=0x7612, pAd->MACVersion=0x53900500, pAd->ChipID=0x0, dev_idx=0
[   15.240000] RtmpChipOpsEepromHook::e2p_type=0, inf_Type=4
[   15.250000] RtmpEepromGetDefault::e2p_default=2
[   15.260000] NVM is FLASH mode
[   15.260000] get_dev_name_prefix(): dev_idx = 0, dev_name_prefix=ra
[   15.280000] ra0: at CSR addr 0xb0180000, IRQ 6.
[   15.290000] WiFi RBUS Startup Time: 0.130s
[   15.290000] <=== rt2880_probe
[   15.350000] Loading modules backported from Linux version v4.4-rc5-1913-gc8fdf68
[   15.360000] Backport generated by backports.git backports-20151218-0-g2f58d9d
[   15.380000] ip_tables: (C) 2000-2006 Netfilter Core Team
[   15.400000] nf_conntrack version 0.5.0 (1973 buckets, 7892 max)
[   15.450000] xt_time: kernel timezone is -0000
[   15.540000] PPP generic driver version 2.4.2
[   15.560000] NET: Registered protocol family 24
[   15.600000] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5390, rev 0500 detected
[   15.610000] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 7620 detected
[   22.010000] RX[0] DESC a72cb000 size = 2048
[   22.050000] cfg_mode=9
[   22.050000] cfg_mode=9
[   22.060000] wmode_band_equal(): Band Equal!
[   22.070000] Key1Str is Invalid key length(0) or Type(0)
[   22.080000] Key2Str is Invalid key length(0) or Type(0)
[   22.090000] Key3Str is Invalid key length(0) or Type(0)
[   22.100000] Key4Str is Invalid key length(0) or Type(0)
[   22.120000] 1. Phy Mode = 14
[   22.130000] EEPROM:Read from [factory] offset 0x0,length 0x200.
[   22.150000] Country Region from e2p = ffff
[   22.150000] E2PROM: D0 target power=0xff20
[   22.160000] E2PROM: 40 MW Power Delta= 0
[   22.170000] 2. Phy Mode = 14
[   22.180000] 3. Phy Mode = 14
[   22.180000] AntCfgInit: primary/secondary ant 0/1
[   22.190000] D1 = -1, D2 = 11, CalCode = 28 !!!
[   22.210000] RT6352_Temperature_Init : BBPR49 = 0xffffffff
[   22.220000] RT6352_Temperature_Init : TemperatureRef25C = 0xfffffff5
[   22.230000] Current Temperature from BBP_R49=0xfffffff5
[   22.240000]  TX BW Filter Calibration !!!
[   22.380000]  RX BW Filter Calibration !!!
[   22.620000] LOFT Calibration Done!
[   22.630000] IQCalibration Start!
[   22.650000] IQCalibration Done! CH = 0, (gain= 0, phase=3d)
[   22.660000] IQCalibration Start!
[   22.680000] IQCalibration Done! CH = 1, (gain= 1, phase=3d)
[   22.690000] TX IQ Calibration Done!
[   22.730000] MCS Set = ff ff 00 00 00
[   25.520000]  ch1 bssid=dc:fe:18:3b:1f:c1
[   25.520000]  ch1 bssid=34:96:72:a8:7f:2e
[   25.530000]  ch2 bssid=f0:2f:a7:e0:12:90
[   25.540000]  ch6 bssid=6c:e8:73:61:14:3c
[   25.550000]  ch6 bssid=3c:8c:40:40:d4:60
[   25.550000]  ch6 bssid=48:7d:2e:c9:49:6c
[   25.560000]  ch10 bssid=00:e0:4c:8b:ae:8e
[   25.570000]  ch11 bssid=9c:06:1b:6e:23:8a
[   25.580000]  ch11 bssid=3c:8c:40:43:44:d0
[   25.590000]  ch11 bssid=00:02:2a:07:ae:c8
[   25.590000]  ch11 bssid=3c:8c:40:43:37:60
[   25.600000]  ch11 bssid=78:d3:8d:0d:2b:da
[   25.610000]  ch11 bssid=3c:8c:40:40:e5:60
[   25.620000]  ch11 bssid=00:24:d6:02:0d:01
[   25.630000]  ch11 bssid=28:cf:e9:83:91:0c
[   25.630000]  ch11 bssid=3c:8c:40:40:df:40
[   25.640000]  ch11 bssid=78:d3:8d:0d:2b:d8
[   25.650000]  ch11 bssid=00:24:d6:80:c3:f5
[   25.660000]  ch11 bssid=b8:55:10:d8:1d:c6
[   25.670000] =====================================================
[   25.680000] Channel 1 : Dirty = 182, False CCA = 495, Busy Time = 0, Skip Channel = FALSE
[   25.690000] Channel 2 : Dirty = 194, False CCA = 233, Busy Time = 0, Skip Channel = FALSE
[   25.710000] Channel 3 : Dirty = 160, False CCA = 61, Busy Time = 0, Skip Channel = FALSE
[   25.730000] Channel 4 : Dirty = 160, False CCA = 90, Busy Time = 0, Skip Channel = FALSE
[   25.740000] Channel 5 : Dirty = 160, False CCA = 57, Busy Time = 0, Skip Channel = FALSE
[   25.760000] Channel 6 : Dirty = 280, False CCA = 212, Busy Time = 0, Skip Channel = FALSE
[   25.780000] Channel 7 : Dirty = 360, False CCA = 96, Busy Time = 0, Skip Channel = FALSE
[   25.790000] Channel 8 : Dirty = 400, False CCA = 67, Busy Time = 0, Skip Channel = FALSE
[   25.810000] Channel 9 : Dirty = 440, False CCA = 52, Busy Time = 0, Skip Channel = FALSE
[   25.820000] Channel 10 : Dirty = 524, False CCA = 95, Busy Time = 0, Skip Channel = FALSE
[   25.840000] Channel 11 : Dirty = 912, False CCA = 140, Busy Time = 0, Skip Channel = FALSE
[   25.860000] =====================================================
[   25.870000] Rule 1 CCA value : Min Dirtiness (Include extension channel) ==> Select Channel 3
[   25.890000] Min Dirty = 520
[   25.890000] ExChannel = 7 , 0
[   25.900000] BW        = 20
[   25.940000] Main bssid = 00:02:2a:07:ab:40
[   25.950000] <==== rt28xx_init, Status=0
[   25.960000] get_dev_name_prefix(): dev_idx = 0, dev_name_prefix=apcli
[   25.970000] RTMPDrvOpen(1):Check if PDMA is idle!
[   25.980000] RTMPDrvOpen(2):Check if PDMA is idle!
[   25.990000] WiFi Interface Up Time (ra0): 3.980s
[   26.140000] 8021q: adding VLAN 0 to HW filter on device eth0
[   26.160000] device eth0.1 entered promiscuous mode
[   26.170000] device eth0 entered promiscuous mode
[   26.200000] br-lan: port 1(eth0.1) entered forwarding state
[   26.210000] br-lan: port 1(eth0.1) entered forwarding state
[   26.270000] IPv6: ADDRCONF(NETDEV_UP): apcli0: link is not ready
[   27.970000] IPv6: ADDRCONF(NETDEV_UP): apcli0: link is not ready
[   28.210000] br-lan: port 1(eth0.1) entered forwarding state



回复

使用道具 举报

8

主题

18

帖子

70

积分

注册会员

Rank: 2

积分
70
 楼主| 发表于 2018-10-9 11:16:20 | 显示全部楼层
该问题已解决,配置错误造成。
回复 支持 反对

使用道具 举报

12

主题

146

帖子

470

积分

超级版主

Rank: 8Rank: 8

积分
470
发表于 2018-10-9 16:10:37 | 显示全部楼层
ok
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

无涯智能官网--无涯智能集研发、生产、销售于一体,主营无线联网通讯模块和设备

公司简介:四川无涯智能科技有限公司,是一家专注于物联网无线通讯方案设计的公司。无涯智能科技集研发、生产、销售于一体,主营无线联网通讯模块和设备。

自定义文字

联系我们

  • 工作时间:周一至周六 9:00-21:00
  • 联系电话:028-62485172
  • 合作邮箱:wanyong0523@qq.com
  • 公司文化:吾生有涯,而智无涯

QQ|手机版|四川无涯智能科技有限公司  

版权所有 Copyright ? 2018 HI-WOOYA. All rights reserved. 粤ICP备05144417-1

快速回复 返回顶部 返回列表